This is the 1st revision to Bulletin G-01-11 which describes the venting requirements related to high efficiency furnaces and hot water tanks.
Tag Archives: B149.1
Alberta Municipal Affairs, Safety Services Issues Revision to Bulletin Related to Certification of Installations at High Altitudes
This is the 1st revision to Bulletin G-02-10 which describes the requirements for high altitude gas installations. The revision addresses how changes to the 2015 edition of the B149.1 affect the requirements.
Alberta Municipal Affairs, Safety Services Issues Revision to Bulletin Related to Side Wall Venting Terminations
This is the 1st revision to Bulletin G-01-10 which describes the requirements for the safe and effective venting of gas-fired appliances. The revision addresses how changes to the 2015 edition of the B149.1 and the 2014 Building Code affect these requirements.
Alberta Municipal Affairs, Safety Services Issues Revision to Bulletin Related to Temporary Heat for Construction Sites
This is the 2nd revision to Bulletin G-08-01-B149.1/B149.2 which describes the requirements associated with the use of construction heaters and torches at construction sites. The revision addresses how changes to the 2015 edition of the B149.1 and B149.2 affect these requirements.
Alberta Municipal Affairs, Safety Services Issues Revision to Bulletin Related to Strain From Building Settlement
This is the 1st revision to Bulletin G-06-01-B149.1 which describes the requirements for gas piping and tubing to accommodate building settlement. The revision addresses how changes to the 2015 edition of the B149.1 affect the requirements.
SaskPower Issued Three Information Bulletins
In May 2016, SaskPower issued three bulletins related to venting of appliances and gas systems in new homes as well as to identify common non-compliance issues. To view the individual bulletins, simply click on the highlighted bulletin number below:
- Bulletin 02-2016 discusses new clauses added to the 2015 edition of the CSA B149.1 Natural Gas and Propane Installation Code. These new clauses are related to the requirements for venting of appliances.
- Bulletin 03-2016 discusses the requirements for licenses gas contractors and gas fitters to ensure that gas inspections are completed before the homeowner takes occupancy.
- Bulletin 04-2016 discusses restrictions to the venting of appliances using exhaust hoods. In addition, the bulletin also describes the most common types of non-compliant issues SaskPower sees in relation to appliance and gas system installations.
SaskPower Issues Bulletin Related to Concerns About Venting Appliances
This information bulletin (04-2016) discusses non-compliance issues related to the venting of appliances.
SaskPower Issues Bulletin to Revise B149.1 Code Related to Side Wall Venting Termination Requirements
This bulletin (02-2016) revises and clarifies the requirements identified in the 2015 edition of the B149.1 Natural Gas & Propane Installation Code as they relate to how side-wall venting must be terminated.
BCSA Issues Revision to Directive Related to Plastic Venting
This Directive (D-G5 070628 5 Rev 4) is the 4th revision of a Directive related to the use of plastic venting and the circumstances under which it may be used with new appliances.
Northwest Territories Public Works and Services Issues Notice Related to Electrical Equipment Near Gas Equipment
This Notice provides clarification of the requirements related to distances between arc-producing electrical equipment and a combustible gas relief device or vent, as per the requirements of the B149.1 Natural Gas and Propane Installation code.