BCSA Clarifies Training Requirements to Work on Propane Storage Tanks

British Columbia - BCSAOn October 25, 2016, the British Columbia Safety Authority (BCSA) issued Directive D-BP/GA-2016-01 named “Personnel Inspection and Maintenance Certification Requirements for Propane Storage Tanks.”

The directive clarifies the training/certification requirements for individuals performing regulated work on propane storage tanks.  Specifically, the BCSA requires individuals who conduct periodic visual inspections of in-service propane storage tanks and PRVs to be the holder of a record of training for a course approved for use by the BCSA, such as the Fuels Learning Centre course “Visual Tank and PRV Inspection“.

Additionally, the directive clarifies that individuals who replace or repair fittings and gauges on propane storage tanks must possess an active Class A or Class B Gasfitter Certificate of Qualification while working under a valid Gas Contractor’s License.

Finally, the directive reminds readers that the transfer of propane from one container to another may only be performed by individuals who hold a current Record of Training certificate specific to the containers and equipment used.  The Fuels Learning Centre is one of the Training Providers recognized by BCSA providing a variety of propane transfer courses.

The Fuels Learning Centre offers two courses designed to train individuals on how to conduct visual tank and PRV inspections.  Our primary version of “Visual Tank and PRV Inspection (SO02) is designed for a variety of propane industry personnel.  For propane tank truck operators our “Loading and Unloading Propane Tank Trucks Including Visual Tank & PRV Inspection (TO04)” covers both how to operate the bulk delivery vehicle AND conduct visual tank and PRV inspections.

To read and download a copy of the directive, click on the “Read More” button below.

Read More

Alberta Municipal Affairs Updates 17 Gas Safety Bulletins

Alberta LogoAlberta Standata Logo

In June 2016, Alberta Municipal Affairs, under the STANDATA banner, issued seventeen revisions to existing Gas Safety Bulletins. The purpose of these Information Bulletins is to clarify specific or additional requirements related to provincial gas safety and pressure vessel regulations. The regulations refer to national codes and standards, so when updated versions of those standards are adopted, the bulletins also require revisions. The province recently adopted the 2015 versions of the CSA B149 Codes which affected a number of existing Information Bulletins, resulting in the following revisions.  To view the individual bulletins, simply click on the bulletin number:

  • Second revision to G-01-03-B149 – This bulletin addresses the requirements for replacement parts for gas-fired appliances.
  • First revision to G-02-01a – This bulletin describes the requirements to obtain special inspection and approvals for uncertified appliances and equipment. The bulletin also provides contact information of recognized certifications and inspection bodies currently operating in Alberta.
  • Second revision to G-03-02 Gas – This bulletin clarifies the permit requirements for new installations where gas is used for fuel purposes.
  • Third revision to G-05-01-B149 – This bulletin identifies the requirements related to the installation of barbeques on outdoor decks and balconies.
  • Third revision to G-05-02-B149.1 – This bulletin describes the minimum requirements to ensure the safe and effective venting of gas appliances.
  • First revision to G-06-01-B149.1 – This bulletin describes the requirements for the protection of gas piping and tubing systems to prevent damage due to strain from building settlement.
  • Second revision to G-08-01-B149.1/B149.2 – This bulletin describes the installation requirements for gas-fired construction heaters and torches within Alberta. The bulletin also covers the requirements for storing propane containers at the construction site.
  • First revision to G-01-10 – This bulletin describes the minimum code requirements to ensure the safe and effective venting of gas-fired appliances.
  • First revision to G-02-10 – This bulletin describes the requirements to adjust input ratings for appliances and equipment which are installed at high altitudes to ensure effective and safe venting.
  • First revision to G-01-11 – This bulletin addresses the requirements for direct vent appliances and equipment which require ULC S636 Certified venting systems.
  • First revision to G-02-11-ABSA – This bulletin describes which elements shall be verified during the initial inspections of LPG storage vessels, based on storage capacity.
  • Second revision to G-03-11-ABSA – This bulletin clarifies the requirements associated with the installation of fuel gas pressure piping in Alberta.
  • First revision to G-04-11-ABSA – This bulletin describes the conditions under which propane storage tanks designed for 200 PSIG may be used in Alberta and when they must be taken out of service.
  • First revision to G-01-13 – This bulletin describes the minimum requirements to ensure the safe installation of door air heaters, direct-fired makeup air heaters, and non-recirculating direct gas-fired industrial air heaters.
  • First revision to G-02-13 – This bulletin describes the minimum requirements to ensure the design, installation and operation of site-specific gas-fired process equipment.
  • First revision of G-01-14 – This bulletin describes the requirements related to the safe installation of gas-fired appliances on building rooftops.
  • First revision of G-02-14 – This bulletin describes the requirements for site specific uncertified gas-fired process equipment in the Alberta Oil & Gas Industry which were installed prior to July 2013.